CARCASS and BOXES {C} 3/4" MDF
C1	Top and Bottom	2	24" x 72"
C2	Sides and Dividers	4	24" x 20"
C3	Box Tops and Bottoms	7	24" x 24"
C4	Router Box Bottom	1	22" x 24"
C5	Ribs	20	3" x 24"
C6	Fillers	4	3" x 16-1/4"
C7	Router Box Slides	2	2 " x 24"
C8	1/2" sheet stock Chop Saw Fence Stop Blocks	4	1-3/4" x 1-3/4"
C9	Cord Cleat Face	2	2" x 3"
C10	Cord Cleat Base	2	1-1/4" x 2"
TORSION BOX {T} 3/4" MDF
T1	Top & Bottom	2	24 " x 72"
T2	Sides	2	2-1/2" x 72"
T3	Ends	2	2-1/2" x 22-1/2"
T4	Long Core	3	2-1/2" x 70-1/2"
T5	Short Core	7	2-1/2" x 22-1/2"
T6	3/4" plywood and hardwood sandwich Corner Blocks	8	2-1/2" x 5-1/8" x 8-5/8"
T7	Leveler block	4	3" x 6"
CHOP SAW FENCES {F} 3/4" MDF
F1	Faces	2	4" x 25-1/2"
F2	Bases	2	3-1/4" x 24"
F3	Brackets	4	3-1/4" x 5-3/4"
ROUTER TABLE FENCE 3/4" MDF
F4	Face	1	4" x 25-1/2"
F5	Base	1	3-1/4" x 24"
F6	Brackets	2	3-1/4" x 4"
F7	Dust Port	1	4-5/8" x 5"
F8	Blocks	2	2-3/16" x 2-3/16"
DOOR AND DRIP SHIELD TRACKS {D} 3/4" hardwood
D1	Door Tracks	2	3/4" x 72"
D2	Drip Shield Track	2	3/4" x 29-1/4"
D3	Drip Shield Bottom Stop	1	1" x 72"
BACK, DOORS and DRIP SHIELD {D} 1/4" sheet stock
D4	Back	1	21-1/2" x 72"
D5	Drip Shield	1	24" x 71"
D6	Door	1	20-1/2" x 28"
D7	Door	1	20-1/2" x 19-1/4"
D8	Back Track Fill Pieces	2	3/4" x 3-1/4"
D9	Back Track Fill Pieces	2	3/4" x 4-1/2"
TOOL BASES {B} Sheet stock
B1	Chop Saw Bas	1	19" x 24"
B2	Planer Base	1	12" x 24"
B3	Squared up 2x4 stock, 1-3/8" thick Support Blocks	2	1-5/16"* x 24"
	*Adjust for your planer bed height

 

 

Sheet Goods
4	3/4 in. x 4 ft. x 8 ft. MDF	$80
1	1/4-in. x 4 ft. x 8 ft. hardboard	$8
4	1/2-in. x 10-in. eye bolts	$27
4	1/2-in T-nuts	$3
4	1/2-in. x 3 in. lag bolts	$2
Electrical
3	Red wire connectors
5 ft.	#12 THHN black wire, stranded or solid
5 ft.	#12 THHN white wire, stranded or solid
5 ft.	#12 THHN green solid wire
3	Ground screws, #10-32
2	4-in. square x 1-1/2-in.deep metal junction box
1	4-in. square x 1-1/2-in. deep metal junction box with an attached mounting bracket
1	4-in. sq. raised cover for one-duplex receptacle
1	4-in.sq. raised cover for two-duplex receptacle
1	Single-gang plaster ring, raised 1/2-in.
3 ft.	1/2-in. flexible metal conduit (or length as needed)
2	1/2-in. flexible conduit connector
2	1/2-in. flexible conduit straps
3	Duplex 15-amp, 120-volt receptacle
25 ft.	12/3 SJ extension cord set, round cord
1	Strain relief cord connector
1	Plastic push-in connector for two cords
TOTAL COST OF ELECTRICAL                                                              $35
HIGHLAND HARDWARE (800) 241-6748
1	Router Switch with Cord Set Item #W2001	$13
1	Router Table Insert, Item #RM-3509	$33
1	Insert Template, Item #10.20.23	$15
WOODCRAFT SUPPLY (800) 225-1153
4	Casters, Item #140639	$58
2	Knobs, Item #27R16	$4
2	1/4 in. T-nuts, Item #130226	$2
MLCS (800) 533-9298
1	Flush-Trim Bit, Item #7808	$15

Ultimate Tool Stand - Exploded View & Electrical Connections - 
Building the Ultimate Tool Stand - Building the Ultimate Tool Stand (continued) - 
Special Features - Special Features (continued) - 
Cutting List & Shopping List